Auto Shop Cabinets in Menifee, CA
Garage Cabinets Trail Menifee plans auto shop cabinets, drawer cabinets, steel benches and parts shelving, for repair bays, tire and detail shops and service departments in Menifee, CA, where the lift, the bay door and the July sun set the layout.
Bookings aren't open yet. Leave your name and number; your message is recorded, and you'll get one message when a local installer is available.
Illustration
The lift and the bay door come first
A repair bay is laid out around what moves: the car, the lift arms, the bay door and the technician. Cabinets go where none of those pass.
| Bay feature | Kept clear | Why |
|---|---|---|
| Lift columns and arms | Swing radius at full travel | Arms and a raised vehicle must clear the cabinets |
| Bay door | Opening and track | A cabinet in the track line stops the door |
| Walkways to the exit | A path from the lift to the door | Fire and safety plans decide the width |
| Fuel, oil and waste stations | Their own spill zones | Cabinets stay out of the way of spill cleanup |
| Electrical panel | Working space in front | The same rule as in a house garage |
The fire marshal and the building department decide the details of a commercial space; the sketch only tries to leave their questions answerable.
Drawers or doors
Drawer cabinets suit parts and hand tools, because a drawer opens to show everything and a door hides the back. Door cabinets suit larger items such as lights, jacks and reels. Most bays use both: drawers at working height beside the lift, doors above and in corners.
Drawer slides carry a rating from the maker for each drawer, and a shop that loads drawers with wrenches should read it. Modular drawer cabinets are $240–$420 per ft, heavy-gauge steel with doors $180–$320.
Benches and tops
A steel-topped bench takes oil, solvent and sparks better than laminate. Heavy-duty steel or maple tops add $30–$90 per ft to the cabinet price, and a standalone workbench is $90–$280 per ft of top. Putting the bench against the cabinet wall lets one anchoring plan serve both.
Dust, heat and long days
A bay in Menifee works through July highs near 97°F, and a roll-up door often stays open all day. Fine dust and grit get into drawers, and a good slide keeps sliding when it is dirty. Finishes that wipe clean and are touched up when chipped keep the cabinets presentable as the shop ages.
Auto shop cabinet prices
A 24 ft bay wall in heavy-gauge steel with standard tops is $4,320–$7,680. A drawer-cabinet wall of the same length is $5,760–$10,080.
| 24 ft bay wall, heavy-gauge steel | Price |
|---|---|
| Standard tops | $4,320–$7,680 |
| Heavy-duty tops | $5,040–$9,840 |
| Heavy-duty tops and wall and floor anchoring | $5,280–$10,560 |
| Same wall plus an 8 ft workbench ($90–$280 per ft) | $6,000–$12,800 |
Bins and parts drawers are $200–$800, haul-away $150–$500, moving tools and stock out and back $300–$900. Market estimates, not quotes.
Auto Shop Cabinets — common questions
What do auto shop cabinets cost in Menifee?
Heavy-gauge steel is $180–$320 per ft and modular drawer cabinets $240–$420, installed in 2026. A 24 ft steel wall is $4,320–$7,680. Market estimates, not quotes.
Can cabinets go in while the bay is working?
Often in zones, or after hours. It is a schedule flag for the installer, and moving tools out and back is a separate line.
Do cabinets need to stay away from the lift?
Yes. The sketch marks the swing of the lift arms and the bay door, and the cabinet run goes where they do not reach.
Auto Shop Cabinets: check availability and price range
Bookings aren't open yet — a typical Menifee range in about 30 seconds.