Custom Garage Cabinets in Menifee, CA

Garage Cabinets Trail Menifee describes custom garage cabinets, melamine and thermofoil boxes, plywood boxes and full-height units for Menifee, CA garages, from a three-car bay with a panel in the middle of the back wall to an older garage whose walls were never straight.

See typical prices Typically from $150

(951) 516-2121 Voicemail

Bookings aren't open yet. Leave your name and number; your message is recorded, and you'll get one message when a local installer is available.

Illustration

When a standard run leaves a gap

Modular units come in set widths, and a wall that is not a multiple of those widths ends in a filler. Custom boxes are cut to the space, so they close the gap around a water heater alcove, under a window, beside the step to the house or past a charger.

In newer Menifee tracts, where 52.2 percent of homes date from 2000 or later, walls are straight but long, and the odd spots are the panel, the charger and the line between bays. In the 18.8 percent of homes built before 1980, a garage can have a side window, a step or a wall that wandered a little, and fit becomes the whole reason for custom work.

Pick the material by the problem

The problem	A good fit	Why
Wall that is out of square	Melamine boxes cut to the wall	Many colors, a plain wipe-down surface
Slab that gets washed	Plywood boxes with sealed edges	Steadier at a wet edge, holds screws well
A smooth, one-piece door face	Thermofoil	Ask about its adhesive and heat range
Tight budget, simple wall	Melamine	$150–$260 per ft with base cabinets
Premium look, long service	Plywood	$220–$360 per ft with base cabinets

Composite wood sold in California carries the maker's formaldehyde-compliance labeling; ask to see it on the sample. Melamine and thermofoil share a price line in the estimator.

Doors, hardware and tops

Doors are slab or shaker, in the maker's generic colors, usually white, gray, black, a wood tone or a stone look. Soft-close hinges and full-extension drawer slides are the two hardware details worth confirming. A top over the base cabinets is laminate, butcher block or stainless steel, priced as the workbench top line at $60–$220 per ft of top.

Hold a sample in the garage's own light. A color chosen under showroom lamps often looks darker in a garage whose door faces strong afternoon sun.

Papers to ask for before a deposit

The cabinet maker's warranty paper, with the term in years and what it excludes.
The installer's own terms, if any, in the same detail.
The shelf and drawer ratings from the maker for the named product.
The lead time from final drawing to delivery, and the days of installation.
Who handles a claim and where the form goes.
Whether the paperwork passes to a buyer if the house is sold.

Custom cabinet prices on Menifee walls

Melamine or thermofoil boxes are $150–$260 per ft with base cabinets and $180–$340 with base and wall. Plywood boxes are $220–$360 and $250–$440. Tall units add $70–$160 per ft in place of the wall-cabinet line.

Wall	Melamine, base and wall	Melamine, tall added	Plywood, base and wall	Plywood, tall added
16 ft	$2,880–$5,440	$3,520–$6,720	$4,000–$7,040	$4,640–$8,320
28 ft	$5,040–$9,520	$6,160–$11,760	$7,000–$12,320	$8,120–$14,560

A workbench top, lighting and locks are separate lines. Market estimates, not quotes.

Custom Garage Cabinets — common questions

When are custom garage cabinets worth more than steel?

When the wall is uneven, there are alcoves or a window to work around, or the color and full height matter. On a plain straight wall, modular steel at $140–$270 per ft with base and wall cabinets is often enough.

Which custom material suits a hot Menifee garage?

Sealed plywood and well-edged melamine both do well. Thermofoil is the one to ask about, because its film is glued on and the maker's heat range matters.

How long does a custom order take?

The maker's lead time sets it, often several weeks from the final drawing. It should be asked for in writing with the install days.

Check your price